Horizontal Centrifugal Pump & Mtr - KC10PCVN385C02

PolyPro pump & motor Neodymium rare-earth magnets provide for unique ability to run dry, handle high SG and temperature liquids. By changing the impeller diameter and magnetic coupling set you can obtain other performance. Large thrust load bearing surface and hydraulic balancing holes eliminate problems associated with other mag pumps. This unique design is superior to traditional ceramic magnet pumps. Motors are true NEMA / IEC std, no special shaft or torque. Robust canti-lever oversized shaft eliminates brakeage.

Maximum Flow		70 gallons/min
Minimum Flow		1 gallons/min
BEP Best Eff. Flow		40 Gallons/Min
TDH (Head) Maximum @ 0GPM		28.14 PSI
Head (TDH) Maximum @ 0GPM		65 FT
TDH Minimum		5
Head @ BEP		52 FT
Head @ BEP PSI		22.51 psi
HP Required		1 HP
HP Standard		1 HP
Inlet Connection Type		FNPT
Inlet		1.5 "
Outlet Connection Type		MNPT
Outlet		1 "
Wetted Materials		PolyPro-GF
Elastomers		Viton
Voltage		230/460 V
Phase		3
Motor		TEFC
Speed		3450 RPM
Motor Frame		56C
Max Operating Temp		180 °F
Viscosity		Vegetable Oil 34.60 cp 200.00 ssu
Max. Particle Size		0.13 "
Max Specific Gravity		1.4 sp. gr.
Max. Particle Hardness		3 MOH
Max. Volume of Suspended Solids		10 %
Shaft		Ceramic
Coupling		Y
Mechanical Seal Type		Double
Pump Bearing		Carbon
Impeller Size		3.88
PH High		7 pH
Weight		40 lbs